#1
Highlight photos that illustrate the colors, options, and details you're interested in
#2
Highlight photos that illustrate the colors, options, and details you're interested in
#3
Highlight photos that illustrate the colors, options, and details you're interested in
#4
Highlight photos that illustrate the colors, options, and details you're interested in
#5
Highlight photos that illustrate the colors, options, and details you're interested in
#6
Highlight photos that illustrate the colors, options, and details you're interested in

Roll On/Off Container Thermo-Asphalt

Product information

Thermal containers for asphalt transportation are modelled and produced in accordance with DIN 30722, tested in accordance with DGUV - rule 114-010 (BGR 186) and have UVV safety instructions sticker. Thermally insulated asphalt containers are combination of innovations, manufacturability and a range of functions.

According to the European Control Road Construction Service, the temperature of the mixture in the asphalt catcher must not be under 150 ° C. The material must be evenly hot, so the material and linking agent will have optimal assembly properties. Thus the temperature of mixture is the key to asphalt’s quality. Conventional transport vehicles with steel troughs can not often guarantee these conditions - immense part of the heat exudes through the walls and floor. Even lids and covers barely improve isolative properties of these transport vehicles. Asphalt container RM Thermo Runner, guarantees much higher temperature stability. The mixture is delivered at the exact temperature by our containers, and temperature losses are minimal. 

RM Thermo Runner are isolated thermal containers for asphalt transporting. Sides and bottom are doubled and equipped with stone wadding with high density. Lining over the isolation is made of aluminum, checker sheet iron. They are offered in different transport volumes, i.e. 6, 8, 10 и 12 cube.

Quality according  to BDS, EN и DIN standards

Specifications and extra options

  • Grip’s diameter: Ø 50 mm
  • Grip’s height: 1570 mm
  • Bottom: of 5 mm St 37.2 (S235JR) or Hardox 450
  • Side walls: of 3 mm St 37.2 (S235JR) or Hardox 450
  • Stone wadding – thickness 120 mm
  • External rolls: replaceable which can be greased
  • Primer colour: outside
  • Paint outside: twice in colour RAL – according to client’s demands

Possible extra options

  • System with one or two chambers
  • Hydraulic, pneumatic or mechanical valve operation for emptying, as well as lids for filling.
  • One-piece and two-piece covers for top filling
  • Checking the temperature of the transported mixtures at real time by means of digital memory thermometer.
  • Engineering ideas for assembling the thermal container over different transportation systems - BDF, board, open trucks and trailers

Make an inquiry